2008 LIEBHERR L542

2008 Liebherr L-542 Wheel Loader, Enclosed Cab, 4WD, hour meter reads 7295, Joystick Controls, Heat/ AC, Dump Clearance at Max Raise: 8.1ft , Length with Bucket on Ground: 24.1ft, Height to Top of Cab: 10.8ft , Wheelbase: 9.9ft , Ground Clearance: 1.7ft , Hinge Pin - Max Height: 12.9ft , Reach at Max Lift and Dump: 3.8ft , Alternator: 24/100 (V/A) 24 V, Starter: 24/10.5 (V/HP), Battery:2 x 135 Ah, Electronic Common Rail high-pressure injection , 4 Cylinders, Engine Model: 4045HFL93, Dry air filter with main and safety element/ pre-cleaner/ service indicator on the display, Gross Power: 161hp, Power Measured @ 2000rpm, Displacement 275cu in, Torque Measured @1600rpm, Max Torque 476 lb, Water-cooled with exhaust turbo charging/ externally cooled exhaust gas recirculation and diesel particulate filter, 4.2in Stroke, 5in Operational , Operating Weight: 29540lb, Fuel Capacity: 54.2gal, Hydraulic System Fluid Capacity: 47.6gal, Engine Oil Fluid Capacity: 5.4gal, Cooling System Fluid, Capacity: 10gal, Hydraulic Fluid Capacity: 29gal, Transmission Fluid Capacity: 1gal, Front Axle/Diff Fluid Capacity: 4.3gal, Rear Axle/Diff Fluid Capacity: 4gal, Static Tipping Weight: 22485lb, Turning Radius: 20.2ft in, Tire Size: 20.5R25 L3, Number of Forward Gears: 3, Number of Reverse Gears: 3, Max Speed - Forward: 24.9mph, Max Speed - Reverse: 24.9mph, Max operating pressure: 5076 psi, “Load-sensing” variable axial piston pump with output and flow control and pressure cut-off in the control block, Relief Valve Setting: 4351.2, Pump Flow Capacity:45gal/min, Raise Time: 5.3sec, Dump Time: 1.6sec, Lower Time: 4sec, Breakout Force: 24054.6lb, Dump, Clearance at Max Raise: 8.1ft, Bucket Width: 8.2ft, Bucket Capacity - heaped: 3.7yd3, Arm length: 8.2ft, Digging depth: 2ft, Length with Bucket on Ground: 24.1ft, Height to Top of Cab: 10.8ft, Ground Clearance: 1.7ft, Wheelbase: 9.9ft, Hinge Pin - Max Height: 12.9ft, Reach at Max Lift and Dump: 3.8ft